1. Virgin & Recycled
2. PE ( Polyethylene ): HDPE. LLDPE, LDPE
3. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade,
4. Strength: Very low cost, Glass transition temperature, excellent chemical resistance
5. Use: Packaging, consumer goods, pipes and fittings
6. Pack: 25kg/bag

Categories: ,

Description

1. Blown Grade:

Item Test Condition Test Method Value Unit
Density   ISO 1183 0.950~0.955  g/cm
MFR 190°C/2.16kg ISO 1133 1.7~2.5  g/10min
Tensile strength at yield   ISO 527-2 24 MPa
Elongation at break   ISO 527-2 >600 %

2. Injection grade:

Item Test Condition Test Method Value Unit
MFR 190°C/2.16kg ASTM D-1238 20 g/10min
Density — ASTM D-792 0.954 g/cm3
Tensile strength at yiled — ASTM D-638 28 MPa
Elongation at break — ASTM D-638 250 %
Impact tensile strength — ASTM D-1822 42 kJ/m2
ESCR   ASTM D-1693 3 —
VACIT — ASTM D-1525 127 °C

3. Film Grade:

Item Test condition Test Method Value Unit
Density   ISO 1183 0.944-0.955 g/cm3
MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield   ISO 527-2 22 MPa
Elongation at break   ISO 527-2  >350 %
ESCR F50,50°C,100% ASTM D-1693A 1000 h
VICAT    ASTM D-1525 126 °C 

Related products